☰ Menu
';

Safe Usage
of OdorXit Products

Using OdorXit Air Quality Manager (AQM)
Air Borne Chlorine Dioxide

Safety for Manufacturing Plants and Water Plants

Chlorine dioxide has been used in water treatment and pulp treatment plants for over 150 years for pulp bleaching. It is neither chlorine or a bleach. It is a potent and useful oxidizing agent (neutralizing) used in water treatment and in bleaching.

Smaller Scale and Home Usage

A much smaller, but important, market for chlorine dioxide is for use as a disinfectant. Since 1999 a growing proportion of the chlorine dioxide made globally for water treatment and other small-scale applications has been made using the chlorate, hydrogen peroxide and sulfuric acid method, which can produce a chlorine-free product at high efficiency. (Wikipedia) OdorXit's revolutionary technology micro pouch contains sodium chlorite and one of several hygroscopic acids (absorbs water). When combined by moisture these two chemicals allow chlorine dioxide to be made in smaller quantites than are needed in a water treatment facility and can be shipped safely and legally.

Because OdorXit's chlorine dioxide (CLO2) products leave no residue, there is no residual CLO2 action - no action after the pouch is used up

Being in the same room with the CLO2 pouch while it is producing CLO2, in most cases is acceptable. If you can smell a chlorine/swimming pool like smell, a fan should be turned on to circulate the CLO2 and it should not be breathed for long periods of time. You should not be in the room or car while a 25gram weight AQM pouch is being used or you have sped up the reaction time by adding water to any AQM pouch. Additional water/moisture produces more CLO2 than the EPA/OSHA recommends for continuous breathing exposure.

What OdorXit AQM Usage Will Do

OdorXit's Chlorine Dioxide product AQM - Air Quality Manager - will safely oxidize/neutralize a wide range of malodors including tobacco smoke, fire smoke, spoiled food, fish, animal scent spray (including cat and skunk), animal and human excrement, bed pan, sick room, and cooking odors. Chlorine dioxide has been shown to also oxidize mold fungus, mold spores and many others.

Like all oxidization-based products, OdorXit AQM can neutralize or oxidize a finite amount of material. This being said, if the pouch size used is not large enough to do the whole job, using another pouch or larger pouch will continue the process until it is completed. With a subsequent re-contamination, as is the case with mold, the treatment simply must be repeated. This fact does not detract from the fact that OdorXit AQM is fast acting and completely effective on a very broad range of malodors and pathogens available to be treated at the time of treatment. Because there is no CLO2 residue, there is no residual CLO2 action and no need to wipe up CLO2.

Regardless of the size of AQM packet used, if the relative humidity is less than 40% or the temperature is lower than freezing the reaction will not take place. You can check the relative humidity by consulting the national weather service at http://www.weather.gov/ and select your area of the country on the map or enter your zip code and it will give you the local weather conditions including relative humidity (RH). Raising the temperature above freezing and raising the humidity by adding a few (2 to 4) drops of water is all that is necessary for the reaction to start and continue. More water will increase the production rate of CLO2 and reduce the life of the packet by as much as 80%. Laying the tyvek reactor packet on a damp paper towel will ensure that the fast release mode has enough water to finish in 20 to 30 hours.

Increase the Effectiveness of CLO2

Using a small fan to stir up (circulate) the air in the area being treated will increase the effectiveness of the treatment significantly. In most cases, a ceiling fan or a 4 to 7 inch electric fan will do great. Here is a 4 inch fan available in the fan department of most WalMart for about $7.00...and yes its made in China, and yes we would like to sell them but buying 10000 is beyond our ability to pay for or store. A 4 to 7 inch fan is a great size for a bathroom or bedroom, but is not big enough for a 1,000 to 2,000 sq ft basement or family room which needs a 12 to 24 inch fan. Remember, CLO2 is about 2.5 times as heavy as air and the point is to get the CLO2 to the odor causing source in the area being treated. Without a fan, the CLO2 will simply lay on the floor.

Keep this and all odor control products out of reach of children. AQM is the big gun in odor control and should be treated with considerable respect.

If you have additional questions or concerns, please email us at Questions or call us on our toll free help line 1-877-ODORXIT (1-877-636-7948). If you get the answering service and they can not answer your question, leave a question that can be answered on the return call whether you pick up the phone or not. We will return your email or phone call promptly.

Buy OdorXit AQM and MOMS odor remover









Copyright 2017 Listening Systems Inc. All rights reserved